Close Form
Menu
Servo Cold Extrusion Hydraulic Press was mainly applicable to metal materials of cold extrusion, forming, shallow, drawing and blanking purposes. Such as: pectacle parts, lock parts, metal hardware, pressing assembly of electronic connectors, electric components and rotor & stator of motor etc.
1. Use servo control system to save energy 50-70%.
2. Pressure stability, pressure error ±1bar, repeatable positioning accuracy up to±0.02mm.
3. Low failure rate, automatic alarm and fault indication, one-button reset function.
4. Remote maintenance service can be realized.
5. Can set up multi-stage pressure, multi-speed and continuous fixed-pressure function.
6. Adopting an integral frame structure, high strength, low distortion and durability.
7. Eight-sided rigid guide rails have good guide precision, strong side pressure resistance and easy maintenance.
8. Suitable for cold forging , warm forging, hot gorging, and applicable to liquid metal forming and ceramic powder metallurgy pressing forming.
Servo Cold Extrusion Hydraulic Press was used for forming of spectacle parts, lock parts, metal hardware, pressing assembly of electronic connectors, electric components and rotor & stator of motor etc.
| Model | Units | Specifications | |
| DKDS-800 | |||
| Main cylinder capacity | ton | 800 | |
| System pressure | Mpa | 25 | |
| Main cylinder stroke | mm | 250 | |
| Open height | mm | 700 | |
| Working table height | mm | 1000 | |
| Working tabel size | L-R | mm | 1100 |
| F-B | mm | 1200 | |
| Master cylinder speed | Down speed | mm/s | 230 |
| Press speed | mm/s | 3-8 | |
| Return speed | mm/s | 180 | |
| Motor power | kw | 42 | |
